Maintaining your car’s braking system should be done on a regular basis in order to ensure that it’s working properly. Brakes are one of the most important parts of your car because they help you stop quickly if need be. This post will go over some tips to keep in mind when checking your braking system and also what could happen if you don’t perform regular maintenance.
Maintaining Your Brake System
The first thing you want to check is how much brake fluid you have left in your reservoir tank. You should always have at least 1/2-3/4 inches of fluid below the max line. If you don’t, then it’s time for a brake fluid flush. Brake fluid can become contaminated with moisture which will reduce its ability to perform properly Flushing the system will help get rid of any old or dirty fluid as well as replace it with clean fluid that will last longer than just a few stops.
You should do this about once every 2 years or so depending on how often you drive your vehicle and where. Another thing you want to check is if there are any cracks in the brake pads or rotor. If there are, you’ll want to get them replaced as soon as possible because it could cause a lot of problems down the road such as having your car pull to one side when braking due to warped rotors. You also want to make sure that the screws and bolts holding everything together are not loose or broken.
If they are, then you’ll have to replace them because they can’t do their job which is keeping everything in place while stopping. Another thing to check is the brake fluid temperature sensor which can be found near the front of your brakes. This will let you know if there’s an issue with your braking system because it monitors the temperature and sends this information to the computer so it can adjust accordingly. If you’re driving in hot conditions, then the sensor will read higher than normal and vice versa for cold conditions.
Buying Replacement Parts
When buying replacement brake discs, you’ll come across two types which are drilled and slotted. Drilled brake discs are better for high-performance driving while slotted ones are better suited for driving in bad weather conditions because they help clear out any debris that may be collecting between the pads and rotors. You can also get a combination of both, but it’s usually not recommended unless you drive in all conditions.
You should always check your brakes when performing an oil change or if you’re having work done on your car because it’s easy to forget about them and then have to do it later on when you’re not expecting it. Not only that, but if you don’t check your brakes regularly, then you could damage them which will force you to spend more money than necessary.
When buying replacement brake pads, you’ll find that there are two types which are organic and ceramic. Organic ones make less noise, but they wear out faster while ceramic ones last longer but can get noisy over time. It’s recommended that you use both types to keep your car running smoothly because the braking system is an important part of driving.
The next thing you want to check is if there are any leaks in the hydraulic lines or hoses. If so, then it’s best to replace them as soon as possible because this could cause problems with your brakes not being able to stop properly. The last thing you want is for your car to pull to one side because of a warped rotor or have the brake pads grind away at it.
You should replace all four wheels at once, but if you don’t have time then at least two of them will do just fine. You’ll also want to make sure that there are no cracks in the callipers and that everything fits tightly together. If not, then this can cause problems such as having the brakes drag or not stopping when needed. Brakes are one of the most important parts of your car because, without them, you’d have a hard time driving around town and also parking.
It’s recommended that you get your brakes checked at least once every year by a professional mechanic so they can make sure everything is working properly because it’s easy to forget about them until something happens. The best way to check your braking system is to take it for a drive and then use the brakes hard so they can take a look at them and see if there are any problems.
You’ll find that the pedal will feel soft when you’re going slow, but it gets harder when braking quickly which is one way to check if everything is working properly. You also want to make sure that there are no leaks in your hydraulic lines or hoses because this could cause problems with your car not stopping correctly.